Now, due to the needs of product packaging and publicity, manufacturers often need to print on the surface of tinplate plate caps, so as to print patterns or text on the electrical tinplate sheets caps. Manufacturers need to ensure that they can achieve very good printing results. Fully realize the role of packaging publicity. As far as the printing effect is concerned, it will be mainly affected by the following factors:
Factor one: Poor production environment. In terms of many factors that affect the printing effect of electrical tinplate sheets caps, the basic performance is in terms of production. If the production environment is not good, the electrical tinplate sheets will be damp before printing, and the surface on electrolytic tinplate steel sheet will be covered with small water droplets, which will be affected by moisture. As a result, the adhesion on the surface of the bottle cap is reduced, and because of the reduction in adhesion, the printed ink cannot be stably attached to the surface of the bottle cap, so naturally a good printing effect cannot be achieved.
Factor two: The seasonal climate is too cold. If the climate is too cold due to the season, and the manufacturer has not taken corresponding measures in production and processing, it is easy to cause the poor printing effect of electrolytic tinplate steel sheet caps under the influence of seasonal factors.
Factor three: too much oil. If the manufacturer applies a lot of oil when printing and processing the tinplate plate bottle cap, the paint and ink layer will not be able to completely wet the electrical tinplate sheets surface, and the printing effect will inevitably be poor.
The above factors will affect the printing effect of electrolytic tinplate steel sheet bottle caps. It is necessary for the manufacturer to have sufficient optimized performance in these aspects, and the printing effect that can be achieved will be very good.
